IMPORTANT:
Prior to using the filter frame, remove
translucent protective plastic coating from both sides.
Use the
steel gel template to cut a filter to the correct size. The filter is
then taped to the transparent filter frame.
Ballast specifications:
Input Voltage: 12VDC
Amperage: FC20 / 3Amp DC
Switching: On/Off
Output frequency: 25 Khz
Size: 9.5” x 6.5” x 2.25”
( 240m x 165mm x 57mm )
Weight: 3 lb. ( 1.35Kg )
Warning! To Warning! To Ensure Proper Operation
ALWAYS TURN
OFF
THE BALLAST BEFORE connecting or disconnecting lamps,
harnesses or Head Extension Cables. Maximum distance, 50ft ( 2 x 25ft cables ).
Ballast Operation
The 12 V Single Ballast operates remote from the fixture. Connect the Kamio lamp harness to
the extension cable or the Ballast, making sure to rotate the locking ring until it clicks into the
locked position. After the lamps are properly installed, the Ballast can be turned on. Avoid
operating in temperatures above 125
°
F (51
°
C).
(Note: The dimmer should be full up w hen striking the lamp. Once the lamp has come up to full
temperature, in 3-5 minutes, then dim to the desired light level.)
It is normal for the lamp to take 1-2 seconds to ignite. In cold temperatures the Ballast may
take longer to ignite the lamp. If it does not ignite within 5 seconds, switch the ballast to OFF,
and try again. If lamp does not strike after 2 or 3 attempts, turn Ballast off, check that the
harness or any extension connections are secure and restrike.
Fixture specifications:
Fixture dimensions: 9.1” x 9.9” x 2.5”
( 230mm x 251mm x 62mm )
Weight with lamp: 1lb. / .45Kg
Weight with lamp
and barn doors: 2.07lb / .939Kg
Содержание Kamio Kit
Страница 1: ...Operation Manual Kamio System ...
Страница 3: ......
