Blue-----“N”
Connect the
corresponding
lines with the
same color or
polarity
Power supply
wires
A Diagram
Brown---“L”
Yellow &
Green----“G”
PL1A1024
PL1A1036
PL1A1048
PL1A1012
450.0
565.0
450.0
450.0
450.0
450.0
450.0
450.0
450.0
565.0
565.0
565.0
Product
Specification
L
W
H
Product Spec
unit: mm
PL1A1060
450.0
565.0
450.0
Lamp Body
lamp pole
Ø450.0mm
H
5
6
5
.0
m
m
Product
Size
Note:
take
PL1A1048 street lamp for example
Ø76.0mm
THE INSTRUCTION OF PL1A GARDEN LIGHT SERIES
THE INSTRUCTION OF PL1A GARDEN LIGHT SERIES
Warning: Luminaire can not be directly installed on the surface of ordinary flammable material in any circumstance
Warning: If outer flexible cable or cord of luminaire are damaged
,
only manufacturer
，
its agent or eligible people can replace them
to avoid accident
Installation Instruction
Step 1: Connecting the power supply wires with the retention wire in Lamp Pole. Make sure it's insulated and waterproof.
lamp pole
check figure A for details
lamp head
Cautions:
Ensure safety and firmness of wiring junction.
Protect power supply cables against scuff during installation.
Not to cleaning the lens with strong acid and any marked corrosive solution.
Step 2: Thread the Lamp onto the pole, make sure
the pole comes to the end of body
Step 3: Tightened the hexagon screws by hexagon wrench.
Make sure until tihgtened
