017904-04 BioFicient 4-6 Installation Manual
2
HEALTH AND SAFETY
You must read these warnings carefully before installing or using the equipment. Always ensure that all relevant documents are
supplied with the equipment transferred to a new owner. Observe all hazard labels and take appropriate action to avoid exposure
to the risks indicated. Take care to maintain correct posture, particularly when lifting. Use appropriate lifting equipment when
necessary.
•
Only experienced contractors should carry out installation, following the guidelines.
•
The unit should have a Pre-Service Agreement Inspection by an approved engineer.
•
A qualified electrician should carry out electrical work.
•
Covers must be kept locked.
•
Observe all hazard labels and take appropriate action to avoid exposure to the risks indicated.
CLOTHING
•
We recommend the use of a dust mask and gloves when cutting GRP components.
•
Any person carrying out maintenance on the equipment should wear suitable protective
clothing, including gloves.
MAINTENANCE AND INSPECTION PROCEDURES
•
If you wish to inspect the operation of the equipment, please observe all necessary precautions, including those listed below,
which apply to maintenance procedures.
•
The power supply to the equipment must be isolated at the control panel(s) before lifting the covers.
•
If the equipment should run with the covers off, all care must be taken to avoid contact with moving parts and electrical
components or conductors.
•
Once power has been isolated, the control panel must be kept locked shut to avoid accidental re-connection whilst work or
inspection is being carried out.
WORKING AREA
•
Ensure that the working area is adequately lit.
•
Ensure that you are familiar with the safe working areas and accesses.
•
Use only the designated access walkways. Do not walk on the cover or deep well safety mesh.
•
Always keep proper footing and balance to avoid any sharp edges
.
