KINGSLEY–BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE MC-47
LEG ASSEMBLY
TABLE TOP
LEG ASSEMBLY
*NOTE
A TENON
B MORTISE HOLE
STEP-I
Unpack, inspect and lay the parts on a clean, flat,
soft surface to avoid marring the wood.
NOTE:
During assembly of the furniture please match all joints with the corresponding
letters or numbers stamped on the furniture.
STEP-II
Carefully lay the TABLE TOP on a flat, smooth surface and fit the
LEG ASSEMBLY mortise holes onto the TABLE TOP tenons as
shown in the assembly photograph. Joints are meant to be tight, use
of a rubber mallet may be necessary.
STEP-III
Carefully hammer the dowels into all the pre-drilled holes of the
assembly as shown in the photo. Use the sanding block between the
hammer and the dowels for the last few blows to prevent marring of
the wood. DO NOT FORCE DOWELS; ANY PROTRUDING
DOWEL CAN EASILY BE SANDED DOWN.
