KINGSLEY BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE GV-30
BACK SLATS
SEAT
SEAT INSERT
*NOTE:
A TENON
B MORTISE HOLE
RIGHT END FRAME LEFT END FRAME
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match joints with the corresponding letters or
numbers stamped on the components.
STEP-II
Gently lay down the END FRAME with the
stamps near the mortise holes on a clean,
flat, smooth surface. Fit the BACK SLATS
and the SEAT FRAME into the END
FRAME mortise hole as shown in the
assembly pictures. You can gently rock the
components until all joints fit snugly together.
NOTE: The SEAT and BACK SLAT tenons will be stamped with letters or numbers to help
guide you, please match them with the letters or numbers stamped on the END FRAME.
