Install the RCD spur and connect wires as
shown in the diagram below.
PLEASE CARRY OUT THIS
SIMPLE TEST PROCEDURE
PRIOR TO EACH USE.
1
. Press the green (R) reset button.
2
. Window indicator will turn red*.
3
. Press white TEST button (T).
4
. Red window indicator will
disappear. This means the RCD
has tripped successfully*.
5
. To reset – press green (R)
button.
*If indicator fails to work, do not
use and return product to place of
purchase.
NOTE
1
: If red window indicator disappears
once the spur has been reset, this may
mean that the appliance or the cable lead is
faulty, and should be checked by a qualified
electrician.
NOTE
2
: Remove this RCD from circuit
before performing any high voltage
insulation tests.
INSTALLATION
Blue (N)
(or Black)
FEED
L
N
Brown (L)
(or Red)
Blue (N)
(or Black)
Brown (L)
(or Red)
FEED
(N)
LOAD
To
Load
From
mains
(L)
LOAD
Green/Yellow
(E)
• Added protection against the risk
of electrocution
• Integral cord outlet and cable clamp
• Does not need resetting after a
power loss
WNS
93
WP-C
(M
92
W)
IP
55
Weatherproof
SafetySure RCD Fused Spur
WNS93WP-C ins_WNS 29/09/2015 16:14 Page 1
