‘Orion Range’
Infra-red Motion Sensor - IP
65
Model: OD
103
Detection from Above
Poor Sensitivity
FIELD OF DETECTION
Important Safety Instructions
•
Please read these instructions carefully before installation and keep safe for future reference.
IMPORTANT
This product should be installed by a competent person and in accordance with the current
IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician
.
•
Always turn off the mains supply before commencing work.
As the detector responds to changes in temperature, avoid the following situations:-
•
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
•
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, lights etc.
•
Avoid pointing the detector towards objects that may move in the wind, such as curtains,
tall plants etc.
Switch the mains supply OFF first to prevent electric shock.
INSTALLATION
Good Sensitivity
This product uses an infra-red heat detector. The detector senses ‘warmth movement’ in the
surrounding area when it is dark. When movement is detected the sensor is activated and
triggers the connected load. It has a built in photo-cell that can identify day and night.
1
.
Remove the rear cover by removing the
screw and pulling off cover, refer to Dia:
1
.
2
.
Connect the mains in and load out
cable according to Dia:
2
feeding cable
through the silicon grommet.
Dia:
1
Dia:
2
OD103 Ins .qxp_GU10 20/11/2015 13:16 Page 1
