INSTALLATION / OPERATING
INSTRUCTIONS FOR
LED CEILING PANEL
MODEL NUMBER:
LEDP6640CW
Please read these instructions fully
before attempting installation.
IF IN DOUBT, INSTALLATION SHOULD
BE MADE BY A QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH
CURRENT WIRING REGULATIONS.
•
Typical applications commercial
buildings, schools, hospitals, offices etc.
ADVANTAGES
•
Energy saving up to
50
%
•
Even lighting output
•
Instant start, no flicking, no humming
•
Unique circuit design, each group of
LEDs work separately, avoiding any
problems with light output caused or
influenced by single faulty LED
•
No RF interference
•
Super slim only
12
mm thick
1
. Remove a suitable
600
x
600
mm
ceiling panel or an existing panel
light fitting.
2
. Ensure the mains has been made
safe.
3
. Connect the LED driver to the
230
V AC mains supply, ensuring
Brown/Red goes to Live and
Blue/Black goes to neutral.
4
. Connect driver output to LED panel
with the supplied connectors.
5
. Position the LED panel into the
ceiling using existing frame.
6
. Re connect supply and turn on to
check illumination.
These instructions should be read carefully
prior to any installation and retained after
completion for further reference and
maintenance.
Please give these instructions to the building
owner/occupier after installation.
IMPORTANT
This unit should be installed to current
IEE wiring regulations, if in doubt please
consult a qualified electrician.
SAFETY INFORMATION
NOTICE FOR USER
1.
Do not disassemble the product.
2
. Electricity supply should be turned
off when checking, replacing and
installing the panel.
3
. Do not use water to clean the panel.
4
. This product should only be used for
indoor lighting.
INSTALLATION INSTRUCTIONS
LEDP6640CW Instructions:LED Ceiling Panel 8/7/13 09:46 Page 1
