4
DRAFT
V1.1
• Figure 1-1 shows the front view of the camera.
• Figure 1-2 shows the bottom and the side view of the camera.
• Figure 1-3 shows the back view of the camera.
• Figure 1-4 shows the inside view of the camera.
To supply power, it is recommended to use 4xAA or 8xAAhigh-performance alkaline batteries( not included).
Make sure the polarity matches the sign on the cover.
lf you are not using the camera for an extended period of time, please remove batteries from the camera to
avoid possible acid leak that may damage the camera.
Alternatively the camera can run on external (6V/2A) DC power supply.
On “
SET
” mode when battery power level gets low, the message “
Low Battery
” will show on TFT screen.
1.4 ILLUSTRATION
2. QUICK START
2.1 BATTERIES
