INSTALLATION MANUAL
• A masthead amplifier is designed
to amplify low signal levels for both
analogue and digital applications.
• The amplifier gain should be selected
to suit each individual environment.
• Mount with polypropylene securing
strap on to mast or mount to a wall
with cable connectors at the bottom.
• Best Mounting location for masthead
unit is on mast 30 cm to 100 cm
below antenna.
• Ensure weatherproof strips remain
in place.
Power Indicating LED
For maximum
VHF/UHF gain
turn control
clockwise.
TECHNICAL ADVICE
1.
Check
there is no earth braid touching the centre
conductor on the coaxial cable.
2.
s
I there more than one outlet?
Check the
splitter box, the power supply must be connected
to the coaxial outlet that feeds the AC/DC leg of
the splitter box to pass power to the head unit.
(Check if LED is on).
3.
s
I there now too much signal causing an
overload effect to the VCR?
Try turning down
the gain controls on the masthead unit, or select a
smaller dB rating amplifier.
4.
f
I there is a white line moving through the
picture?
Try a PSK06 14 V DC power supply.
Drawing No: 40565-7
Part No. 310113
4
Optimised for both Digital and
Analogue TV Signal Amplification
MODEL MHW34G/GDP MHU34G
Masthead Amplifiers
Thank you for selecting an Australian designed and built
masthead amplifier.