Specialists in TV Signal Amplification
INSTALLATION MANUAL
kingray.net.au
Fully Shielded & F Type Masthead Distribution Amplifier
MODEL MDA20HT
• Mount with polypropylene securing strap
on to mast or mount to a wall with the four
pre-drilled holes.
• Best mounting location for masthead unit is
on mast within 3 metres below antenna.
• Ensure weatherproof strips remain in place.
• Very low Noise Figure.
• Ideal for digital reception.
Thank you for selecting an Australian designed
and built F Type masthead amplifier.
POWER
LED
The MDA20 Series amplifier is based on a new
concept of convergent technology. The characteristics
of the IC selected provide a noise figure that is lower
than any other product currently on the market and
an output figure that surpasses most distribution
amplifiers hence the name Masthead Distribution
Amplifier (MDA).
The MDA20 Series are multipurpose amplifiers
that are ideal for our digital environment. Whether
the units are used as a Masthead or Distribution
Amplifier the low noise figure, capacity for multiple
channels with low distortion and a high output
provides a solution to all installations and is proven
especially effective in digital problem reception areas.
GENERAL INFORMATION