Revision 2 Date: 11 Jun 2020 Page 6 of 12
Use [◄, ►] to select the digit to be edited; the selected digit will be
highlighted. Use [▲, ▼] to edit the value of selected digit. Press [OK] to save
changes or press [OFF] to exit Time Setting mode without saving.
Date and time format:
Date: YY/MM/DD
Time: HH:MM
Time Setting mode will exit automatically if no subsequent key is pressed 10
sec after it was selected.
3.4 Selecting measurement unit
At home display, press [F2] to select measurement unit (dBm or nW).
3.5 Relative Measurement Mode
Press and hold [▼] to enter Relative Measurement mode; all displayed
values will be “zero-ed” and the measurements unit will change to dB.
To exit Relative Measurement mode, press [F2].
