_________________________________________________________________________________________
Page 9 of 11
Ver 1.7 File No.:RTU5034103
A Professional GSM 3G M2M products manufacturer
and automation solution provider, since 2005.
www.4G-RTU.com [email protected]
5.3.6 Control the relay ON/OFF by SMS command
Return SMS: Relay ON (or the SMS confirmation content which you modified before)
Return SMS: Relay OFF(or the SMS confirmation content which you modified before)
The relay close timer according to the before setting 5.3.3:
5.4 Others:
5.4.1 Self-check auto report SMS to the 1
st
number. (unit: hour)
xxx=000~999
xxx=000, default,no self-check auto report.
Auto report SMS including:
Relay status;
GSM signal value(full is 31,cellular signal weak if lower than 14)
Inquiry the self-check and auto-report time
5.4.2 Inquiry current status
5.4.3 Inquiry the GSM modules’ IMEI code and firmware version
5.4.4 RESET
Switch ON the device, insert into the reset hole with a pin,hold for about 5 seconds and release it.
This operation will reset the password to default 1234 and other parameters, but the authorized users numbers
will remain on the memory.
pwdG
OFF
##
pwdG
ON
##
pwdCC
pwdDD
pwdGOT
close time
#
pwdT#
xxx
#
pwdT#
pwdEE
pwdIMEI#
Reset button
