Pages 33 Total 58
Shenzhen King Pigeon Hi-Tech Co.,LED
Ver 1.2
PLC Data acquisition protocol conversion gateway
-D225
5.2.3.3
Communication connection configuration with D225
Operation instructions: (1) Click "Connect…" of "Connection" to pop up the connection
configuration box, (2) The communication protocol with D225 is: Modbus TCP, (3) fill in the address
of the D225 device,
note: the address should be the same as the [on the D225 configuration
software The [IP address] configuration of the network settings is the same,
(4) fill in the port
number of the D225 device,
note: the port number must be consistent with the [port] configuration
of the [protocol parameter] on the configuration software, the port number here is not [service
settings] [Port Number],
(5) Other options can be defaulted or modified according to your own
needs. Click "OK" to communicate with D225 and collect data on S7-200 SMART
5.2.3.4
Comparison of the data collected by Modbus Poll and the
data checked by the programming software
The data collected by Modbus Poll is as follows (click "Communication" of "Display" to view the
detailed data communication information)
