ASSEMBLY INSTRUCTIONS
MOUNTING THE IMPELLER HOUSING
TO THE SUPPORT BRACKETS
Place the impeller housing onto the
support brackets (It is recommended that
you get assistance for this assembly; the
impeller housing is heavy and awkward).
Fix the impeller housing using hex. bolts,
lock washers and washers. See Fig.4.
MOUNTING THE
HOUSINGS AND
HANGER BRACKETS TO THE
IMPELLER HOUSING
1) Fix the housings to the impeller
housing using hex. bolts, washers,
lock washers and hex. nuts. See Fig.5.
2) Now the support legs must be fixed to
the housings but don’t forget the
hanger brackets. The hanger brackets
must be placed between the housing and the support leg, see Fig.5. Fix them using
hex. bolts and lock washers.
MOUNTING THE BAG HANGERS TO THE HANGER BRACKETS
Insert lower hanger into the
hanger bracket and then insert
the upper hanger into the
lower hanger and secure with
fixing screw, see Fig.5.
Hex. bolt
Lock
washer
Figure 4
Figure 5
Hex. bolt
Lock
washer
Lower hanger
Fixing screw
Upper hanger
Hex. bolt
Washer
Lock washer
Nut
Hanger
bracket
ASSEMBLY INSTRUCTIONS
MOUNTING THE SWITCH TO THE
FRONT SUPPORT BRACKET
Simply slide the switch into the switch
bracket, see Fig.6.
MOUNTING THE DUST BAGS TO THE
HOUSINGS AND THE HANGERS
Insert a retainer strap through the keepers
of one of the filter bags (top bag) and
attach it to the top part of one of the
housings. Attach the top of the filter bag to
the hanger. Repeat this step for the
second filter bag.
Insert a retainer strap through the keepers
of one of the collection bags (bottom bag)
and attach it to the bottom part of the
housing. Repeat this step for the second
collection bag.
ADAPTOR
Place adaptor onto the top of the impellor
housing.
At this point, your dust collector is
assembled and should look like the
picture in Fig.7.
Switch
Switch bracket
Figure 6
Figure 7
