King Industrial KAC-1050 Скачать руководство пользователя страница 6

SETTING UP THE AIR CLEANER

UNPACKING

The air cleaner is shipped complete in one carton. Carefully unpack the Air
Cleaner and all loose items from the carton. 

WARNING: DO NOT LIFT THE

AIR CLEANER BY ITS POWER CORD.

WARNING: STYROFOAM BLOCKS PLACED AROUND THE MOTOR AND
IMPELLOR MUST BE REMOVED BEFORE OPERATING AIR CLEANER.

1) Pivot the upper and lower filter retaining clips (A) Fig.4 and pull out the outer

and inner filters (B).

2) Remove the steel meshing (C) inside the air cleaner and remove the styro-

foam blocks (D). 

3) Reinstall the steel meshing, inner and outer filters and secure the filters with

the retaining clips.

SETTING UP THE AIR CLEANER

Operational tips:
• This air cleaner will work best if it is located away from corners and heating/

cooling vents.

• This air cleaner is specifically designed to circulate and filter non-metalic

dust, which is generated throughout the work area. 

Hanging air cleaner from ceiling

1) This air cleaner can be hung from the ceiling. Remove the four large pan

head screws (A) Fig.5 from the top of the air cleaner housing using a Philips
screwdriver.

2) Install the four air cleaner eye bolts (B) Fig.5 to the top of the air cleaner

housing.

3) Mount ceiling hooks and chains (not included) properly rated for hanging

this unit (minimum 60 lbs capacity) in the ceiling to mount the air cleaner.

Mounting air cleaner to ceiling or wall

1) Four brackets (A) Fig.6 can also be used for mounting to a ceiling or wall.
2) Place one end of bracket underneath the lip of the air cleaner cabinet (B).
3) Secure the bracket (A) to the cabinet with two hex. bolts, spring  washers

and washers (C) as shown in Fig.6. Repeat steps for the remaining three
brackets.

4) Secure air cleaner to ceiling or wall with appropriate hardware (not

included). 

WARNING!

Ceiling hooks  or mounting brackets must be anchored to the

building structure, which will support a minimum of at least 100 pounds. Never
mount to drywall or false ceiling grids. Hang/mount unit with a 7ft. clearance
from the floor.

FIGURE 4

FIGURE 5

FIGURE 6

Содержание KAC-1050








Отзывы: