ASSEMBLY
INSTALLING SAFETY GUARD continued...
4) Position the safety guard (A) Fig.7 over the T-bolts. Using two washers
and lock knobs (B), tighten the lock knobs to secure safety guard.
INSTALLING DUST CHUTE
1) Insert two square nuts (A) Fig.8 into the bottom T-slot at the rear of the
aluminum fence as shown.
2) Position the dust chute (A) Fig.9 centered with the opening in the
aluminum fence.
3) Insert a pan head screw (B) Fig.9 into both sides of the dust chute (A),
align all parts with the square nuts (A) Fig.8 then tighten pan head
screws.
4) If you have purchased and installed the Universal Dust Collection Kit (A)
Fig.10 (mod. XL-130), attach the 2-1/2” dust collection hose (B) to the
fence dust chute (C) and secure it in place by tightening hose clamp (D).
Refer to Fig.10.
FIGURE 7
FIGURE 8
FIGURE 9
FIGURE 10