Kinetrol 05 EL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 1 / 25

Issue
N
C.S.
Trading Estate Farnham Surrey England
Doc. No. TD 120
Page 1 of 25
TD 120 – MAR/20
N – AR7059 / M – AR6971 / L - AR6419 / K - AR6347 / J-AR6096 / H – AR 6082 / G – AR 5487 / F – AR 5608 / E - AR 5293
Title : Installation, Operation & Maintenance Instructions – IS Digital EL Positioner
1. CONTENTS.
Page. Section.
1 1. Contents.
2 2. Safety Requirements.
3 3. Installation - 3.1 Mounting of Direct Mounting Units onto Kinetrol Positioner-Type Actuators.
4 3.2 Mounting of Discrete Positioner.
4 3.3 Air and Electrical Connections.
5 4. Schematic Functional Diagram.
6 5. Set-up - Diagram and General.
6 5.1 Setting Travel Speed.
6 5.2 Setting Limit Switch Cams (Optional Equipment).
7 5.3 Overview - Electronic Settings.
7 5.4 Default Settings and Reset Procedure.
8 5.5 Entering and Leaving Setup Mode.
8 5.6 Automatic Endstop Finding Procedure.
8 5.7 Proportional Gain and Damping Settings (for Smoothness and Sensitivity).
9 5.8 Low Current Point and High Current Point Settings.
10 5.9 Reversing Clockwise / Anticlockwise Sense of the Positioner.
10 5.10 Changing the Direction of Movement on Loss of Signal.
11 5.11 Resetting the Feedback Pot.
11 5.12 EEPROM Checksum Error.
12 5.13 Selecting and Setting Up Non-Linear Curves.
13 5.14 Setting Optional Angle Retransmit Span.
13 5.15 Adjustment of Position of Optional Clearcone Monitor.
14 6. Maintenance & Troubleshooting.
14 7. Identity Label.
15-22 8. Baseefa - EC Type Examination Certificate & IECEx Certificate of Conformity.
23-25 9.1 Spare Parts : Exploded View.
9.2 Spare Part Numbers.
(KF 536)
04.03.20