S
AFETY
6
E
PI
S
ENSOR
U
SER
G
UIDE
WARNING!
sentencias identificando condiciones o practicas que podrían
resultar en una lesión personal o la perdida de la vida.
Los últimos dos términos mencionados arriba podrían también aparecer en
el equipo Kinemetrics que Usted ha comprado, pero no necesariamente
#
indiferentemente, Usted debe definitivamente tomar notas serias de las
precauciones y advertencias en este manual.
Precauciones Específicas
Siga las precauciones a continuación para garantizar su seguridad personal y
prevenir daños al EpiSensor.
Fuente del poder
El EpiSensor debe ser alimentado con energía ya sea desde un registrador o
desde una fuente de
"
12V provista por el usuario.
Si usted planea alimentar el EpiSensor desde un registrador, conecte el
registrador a una fuente de poder/cargador suministrado por Kinemetrics,
como se describe en cada manual del usuario para el registrador.
Para suministrar energía directamente al EpiSensor, usted necesita una
fuente de poder de bajo ruido y regulado
"
12V, el cual debe ser
apropiadamente conectado a tierra y cumplir con todas las regulaciones
locales que apliquen.
Sistema de Poder
/
Carga Provisto por el Usuario
Si usted provee su propio sistema de poder/carga, usted tiene que estar
seguro, que el sistema proporciona el voltaje correcto y la corriente
requerida por el EpiSensor bajo todo las condiciones de operación. Usted es
responsable por la seguridad de su sistema de carga.
Si usted deriva energía de suministro principal, usted tiene que asegurarse
que ha provisto un polo a tierra adecuado para todo el equipo. Si usted
suministra sus propias baterías, siga las recomendaciones de seguridad del
fabricante.
Cableado y Polo a Tierra del Sensor
En algunos casos el EpiSensor estará a una distancia lejos del registrador.
En estas instalaciones existe la posibilidad de una elevada diferencia de
potencial entre dos localidades de polo a tierra, debido ya sea a fallas en el
alambrado del AC o corrientes de un extremadamente alto retorno de tierra.
Cuando el cable esta polarizado a tierra en uno de sus lados terminales, un
voltaje potencialmente letal puede existir entre el otro lado terminal del
cable y el polo a tierra. Considere este peligro durante la instalación y
obtenga ayuda de un electricista calificado si este peligro existe.
!