Kinco FD425-CA-000, Руководство пользователя, Страница: 91 / 206

Kinco FD5 系列伺服驱动器使用手册 第六章 工作模式介绍
88
2020.13 20
Din_pos[7]
D3.40 2FF1.01 8
Din_position_sel
ectL
Select the position segment L to be set (L range
is 0-7, corresponding to the internal position
segment 0-7 in turn)
D3.41 2FF1.02 10
Din_position_M
Number of pulses set in position segment (L)
=M*10000+N
D3.42 2FF1.03 10
Din_position_n
For example
The configuration interface of I/O is shown in the following figure
：
Figure 6-2: D
IN Configuration window
Figure
6-3 DOUT
Configuration window
Table
6-15 DIN
Location mode setting
Digital tube
key address
Home
address
Bits Name Descriptio
n
D3.17 2020.0E
Operation mode choose
1
1
2020.02
Din
Position
[1]
User define
DEC
2020.06
Din
Speed
[1]
User define
rpm
6083.00
Profile_ acceleration User define
rps/s
6084.00
Profile_ deceleration User define
rps/s
After enabling, select the position segment to go, the simulation command is activated, the drive executes
the program of the selected position segment, and outputs the multi-function signal 0 after reaching the Din
position [1].
。