Kinco FD425-CA-000, Руководство пользователя, Страница: 68 / 206

Kinco FD5 系列伺服驱动器使用手册 第五章 KincoServo 上位机使用指南
65
Figure
5-9
Digital input
Function ： Click to select Din function setting click to
delete the DIN function
Real ： Shows the real digital input hardware status.
1 means “active”, logic status of the digital input is 1.
0 means “inactive”, logic status of the digital input is
0.
Simulate: Simulates the digital input active hardware
signal.
1 means the digital input is simulated as “active”,
logic status 1.
0 means no impact on the digital input logic status.
Polarity: Inverts the logic status of the digital input.
1 means Internal is set to 1 by “active” signal.
0 means Internal is set to 1 by “inactive”
Internal: This is the result of Simulate, Real and Polarity via
the logic formula: Internal=(Real OR Simulate) XOR (NOT
Polarity)
1 means “active”, logic status of the selected function
is 1.
0 means “inactive”, logic status of the selected
function i
s 0.
Table
5-2
Digital input functions
DIN function Description
Enable
Controller enabling
1: Enable controller = Din control word selection(2020.0F)
0: Disable controller = 0x06
Reset errors Set the Controlword to reset errors, active edge （ bit7 ） = 1
Operationg
mode
Operation_mode selection
1:Operation_mode = EL.Din_Mode1 (2020.0E)
， Defult value=-4
0:Operation_mode = EL.Din_Mode 0 (2020.0D) ， Defult value =-3