Kinco FD425-CA-000, Руководство пользователя, Страница: 127 / 206

Kinco FD5 系列伺服驱动器使用手册 第七章 性能调节
124
Chapter7:Tuning of the servo system control
Figure
7-1
Servo system control block diagram
Figure 7.1 shows the servo system control block diagram. It can be seen from the figure that the
servo system generally includes three control loops: current loop, velocity loop and position loop.
The adjustment process of a servo system is used to set loop gain and filters to match the
mechanical characteristics, and finally to prevent the entire system from oscillating, to permit it to
follow commands quickly and to eliminate abnormal noise.
。
7.1
Auto-tuning
The auto-tuning function will try to stimulate the motor and load system by some motions and get
the inertia of the load. If auto-tuning is successful, stiffness will be auto-set according to the inertia
ratio.
Figure
7-2
Auto-tuning
⚫
kaff
：
Position loop acceleration feedforward
⚫
kvff
：
Position loop speed feedforward
⚫
kvp
：
Velocity loop proportional gain
⚫
kvi
：
Velocity loop integral gain
⚫
kpp
：
Position loop proportional gain