Kimo KNT 320, Руководство пользователя

Страница: 9 / 16

Procedure to send a new configuration:
Once the dataset is transferred to the data collector (see downloading procedure described page 7, screens 1 to 3):
When a new configuration is sent on the Kistock with the data collector, two types of start can be sent: start by PC
or start by button . The type of start which is sent depends on an immediate start or not of the dataset with the
data collector.
Device use 9
No new configuration is sent:
The Kistock displays *.
The data collector displays
“On”.
No new configuration has been sent on the Kistock.
To start a new measurement dataset, reconfigure the device
with the data collector, following the opposite procedure, or
with the Kilog 2015 software
(please see the Kilog 2015 software
user manual).
A new configuration is sent:
The Kistock displays flashing icon*.
Device is waiting for start.
The data collector displays
“On”.
A new configuration has been sent but
the dataset did not start.
The Kistock is automatically configured with
a type of start by button: the new dataset
can be started by pressing the
OK key of the
Kistock.
An other measurement dataset starts:
The data collector displays the new
configuration transfer progression: 0-100%
then displays
“On”.
The Kistock displays *
A new configuration has been sent and
an other measurement dataset starts.
The Kistock is automatically configured
with type of start by PC.
3-a. Dataset is
stored on the data
collector
4- “Conf YES”
Send a new
configuration
5- “Start YES”
Start an other
dataset
REC
REC
END
5- “Start NO”
Do not start an
other dataset
4- “Conf NO”
Do not send a new
configuration
6- An other
measurement
dataset starts
6- “On”
Back to
home screen
6- “On”
Back to
home screen
* only for models with display