Kimo ATE 310, Руководство пользователя

Страница: 9 / 24

3. Access to the different functions
This step is necessary for each configuration of the transmitter.
To have an access to the transmitter functions, and for security measures, you need to fill in a security code. By default, this
security code is
0101.
•
Verify that the transmitter is powered.
➢
Connect the transmitter.
➢
Wait the end of the initialization phase.
➢
Press OK.
“
Code”
is displayed with “
0000”
. The first 0 flashes.
➢
Press OK to move on the second 0.
It flashes.
➢
Press Up key to display 1 then press OK .
The third 0 flashes.
➢
Press
OK
to move on the fourth 0.
➢
Press Up key to display 1 then press OK.
The following screen appears :
“F 100” corresponds to the configuration folder number. 5 are existing :
•
F 100 : folder of the device configuration. See page 10.
•
F 200 : folder of the channels and measurement units. See page 13.
•
F 300 : folder of the analogue inputs. See page 14.
•
F 400 : folder of the alarms. See page 17.
•
F 500 : folder of the channel configuration, the integration and autozero. See page 19.
To select the required configuration folder :
“F 100” is displayed and 1 is blinking.
➢
Press Up key until the required folder number displays (F 100, F 200, F 300 or F 500).
➢
Press OK .
9
Access to the different functions
Code
0101
F 100