XSEDE
®
Height Adjust
1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part 3049377,B
Assembly Instructions
1.
Assemble Feet to the Columns using supplied Socket Round
5/16
-
18 X
5/8”
screws. Tighten Screws Firmly. See Figure B.
IMPORTANT
: Make sure the correct screws are used. Using
longer screws may destroy the internal parts of the column.
2.
Loosen the set screw and set the Crossbar length based on
top size as seen in Figure C below. Attach the crossbars on
the long side of the bases using supplied Socket Flat Head
5/16
-
18 X
1”
screws. See Figure C.
IMPORTANT
: Make sure the correct screws are used. Using
longer screws may destroy the internal parts of the column.
Figure A
Assembled Product
Xsede Height Adjust
Freestanding T
-
Leg Base
Hardware
4
—Round Head Socket 5/16
-
18 X
5/8”
8
—Flathead Socket 5/16
-
18 X
1”
4
–
Flathead Phillips 1/4
-
20 X
5/8”
8
-
Clear Bumpers
1/2”
Round X
1/8”
2
-
Clear Bumpers
1/2”
Square X
1/4”
8
-
Panhead Phillips #8X3/4
”
Wood Screw
4
-
Flathead Phillips #10
-
2
3/8”
Wood Screw
4
–
Panhead Phillips #8 X
5/8”
Wood Screws
2
-
Cable ties.
1
—
Power Supply Bracket
Installation
Crossbar
Sidebar
Column
Foot
Figure B–
Attach Feet
Figure C–
Attach Cossbar
Do not
use middle hole of cross bar
Tools Required
•
3/16”
Hex Drive
•
#2 Phillips Drive
•
Drill
48
”
54
”
60
”
66
”
72
”
Top
