XSEDE
®
Height Adjust
1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part 3111703,
-
Assembly Instructions
1.
Assemble Feet to two Columns using supplied Socket
Round 5/16
-
18 X
5/8”
screws. Tighten Screws Firmly. See
Figure B.
IMPORTANT
: Make sure the correct screws are used. Using
longer screws may destroy the internal parts of the column.
2.
Loosen the set screw and set the Crossbar length based on
top size as seen in Figure C below. Attach the crossbars on
the long side of the bases using supplied Socket Flat Head
5/16
-
18 X
1”
screws. See Figure C.
IMPORTANT
: Make sure the correct screws are used. Using
longer screws may destroy the internal parts of the column.
Figure A
Assembled Product
Xsede Height Adjust 3 Column
T
-
Leg
Hardware
4
—Round Head Socket 5/16
-
18 X
5/8”
12
—Flathead Socket 5/16
-
18 X
1”
4
–
Flathead Phillips 1/4
-
20 X
5/8”
12
-
Clear Bumpers
1/2”
Round X
1/8”
4
-
Clear Bumpers
1/2”
Square X
1/4”
8
-
Panhead Phillips #8X3/4
”
Wood Screw
12
-
Flathead Phillips #10
-
2
3/8”
Wood Screw
4
–
Panhead Phillips #8 X
5/8”
Wood Screws
4
-
Cable ties.
1
—
Power Supply Bracket
Installation
Figure B–
Attach Feet
Figure C–
Attach Cossbar
Do not
use middle hole of cross bar
Tools Required
•
3/16”
Hex Drive
•
#2 Phillips Drive
•
Drill
Sidebar
Column
Foot
Crossbar
48
”
54
”
60
”
66
”
72
”
Top
