Assembly Instructions
Fluent
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2205354
Revision B-09
Page 1 of 2
Modesty Panels
Tools Required
Package Contents
Installation
Resin Modesty panel:
1. Slide bracket onto resin modesty panel and tighten all set
screws. (Figure A).
2. Align modesty panel centered left to right (approximatley
1
1
⁄
2
" on both sides), to dimension shown front to back with
worksurface, measure and mark hole locations. (Figure B).
3. Drill pilot holes to insure modesty is mounted perpendicular
to surface. Attach modesty panel assembly to worksurface as
shown. (Figure C).
Figure A
Figure B
Modesty Panel
Worksurface
Tape Measure
Pencil
Screw Gun
#2 Phillips Head Bit
Bracket
Resin Modesty
Fixed Modesty
Technology Modesty
“L” Bracket
8-32 UNC
Set Screw
Hinge
#8 x
3
⁄
4
"
Panhead Screw
#8 x
3
⁄
4
"
Panhead Screw
#8 x 1"
Panhead Screw
9
⁄
64
" Allen Tool
Figure C
5
1
⁄
2
" max.
1" min.
9
⁄
64
" Allen Tool
Pre-Drill Pilot Holes
Prior to Fastening Screws
