BioMax2 / KBio2-Online
Installation and Programming Manual
Page
70 of 91
10.3. Sensor database management
10.3.1. Add user
Function: It allows for a user's biometric information to be registered in the sensor’s
database, as well as in
BiomaxPlus-DB
if installed.
10.3.2. Request number of users
Function: it returns the number of users stored in the sensor’s database.
Instruction
‘564nnnnnnnnnn0000000000t’ - ExtraData: “hhh...hhh”
Description
‘564’
Instruction code.
‘nnnnnnnnnn’
User identifier.
‘0000000000’
Reserved.
‘t’
Template destination. Possible values:
‘1’, ‘2’, ‘3’ - Send template to Main FIM (‘1’), to
Auxiliary FIM (‘2’) or to both (‘3’).
‘hhh...hhh’
Biometric information of the user to be registered.
Only used where ‘t=1’, ‘t=2’, ‘t=3’.
This information travels through the Extra-data field
of the frame and has been previously captured
through ‘713’ command.
Response
‘664rr’
Description
‘664’
Response code
‘rr’
Operation result. Possible values:
11 - Operation completed correctly.
Instruction
‘715’ / ‘725’
Description
‘715’
Instruction code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
No argument
Response
‘815nnnn’ / ‘825nnnn’
Description
‘815’
Response code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘nnnn’
Number of users stored in the sensor’s database.
