Sirius Capacitor Module
–
User Manual
Model Number - 3550-48-B-1.7C-M-SD-A-L-19G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
20
Step 3: Module Shut-Down:
1.
Press and hold the fault reset button to turn
OFF
the terminal. After 3 seconds the terminal status
LED will go
OFF
.
2.
Make sure every indicator on the Module is
OFF
.
3.
Turn
OFF
the Module by moving the Circuit breaker button to the
OFF
position.
5.2
Password Protection:
Sirius Module is protected with password in order to prevent unsafe situations. When switching ON
the Module or after the Module is tilted, LCD will display the following message.
Follow the steps below to input the Password.
1.
Go to Sirius Monitoring Application. For Software Configuration, read section 4.3.
2.
When the dialog Screen appears, enter the default password and click on
Submit
button as shown
below.
Default Password:12345678
Note!
Always turn OFF the Module when not in use because it is Self-
Powered. If left ON, the self-discharge rate will increase.
Note!
Due to shipping laws and regulations, the Module may be shipped in
partial State of Charge.
