8
Ⅵ
. Function Description:
1. This Battery Screwdriver is an Impact Screwdriver. When the screw is
being fastened with DaDaDa sound, it means the Battery Screwdriver
continues to apply the impact until the stroke is completed, and then it will
stop the impact action.
(1) Start trigger:
1-1. Press the start trigger 1/3 inward, and the Battery Screwdriver will
start slowly. Press the trigger deeper, the screwdriver runs faster until the
trigger is fully pressed, and full speed is reached. According to the setup
condition, when the impact is stopped in the final position or the trigger is
released, the Battery Screwdriver will stop running.
1-2. Press the trigger to wake up the screwdriver.
(2) Forward and reverse switch lever:
2-1. When pushing the forward and reverse switch lever to the right,
follow the arrow symbol
→
on the switch for forward
, to tighten the
screw; otherwise, follow the arrow symbol
←
on the switch for reverse
,
to loosen the screw, as shown in the figures below; whenever you do not
use the Battery Screwdriver, leave the forward and reverse switch lever in
the middle.
2-2. Leave the forward and reverse switch lever in the middle, and press
trigger to LED ON or OFF.
Forward
(Lock Screw)
Reverse
(Retract Screw)
