Kikusui TOS9200, Руководство по эксплуатации

Страница: 26 / 172

1-4 Setup TOS9200/9201
■
Do not use the tester in locations near a sensitive measuring
instrument or receiver .
Operation in a location subject, may cause such equipment may be af fected by noise gener -
ated by the tester .
At a test v oltage e xceeding 3 kV , corona dischar ge may be gener -
ated to produce substantial amounts of RF broadband emissions between grips on
the test leadwire. T o minimize this ef fect, secure a suf fi cient distance between alli -
g ator clips.
In addition, k eep the allig ator clips and test leadwire a w ay from the surf aces of con -
ductors (particularly sharp metal ends).
■
Secure adequate space ar ound the po wer plug.
Do not insert the po wer plug to an outlet where accessibility to the plug is poor .
And, do not place objects near the outlet that w ould result in poor accessibility to
the plug.
■
Use the pr oduct in an industrial en vir onment.
This product may cause interference if used in residential areas. Such use must be
a v oided unless the user tak es special measures to reduce electromagnetic emissions
to pre v ent interference to the reception of radio and tele vision broadcasts.
1.3 Precautions for Moving
When mo ving the tester to the installation site or otherwise transporting it, tak e the
follo wing precautions:
■
Bef ore mo ving the tester , turn off the po wer s witc h.
T ransporting the tester with its PO WER switch on can lead to electric shock and
damage.
■
When mo ving the tester , Disconnect all wires fr om it.
Mo ving the tester without disconnecting the cables may result in breakage of the
wire or injury due to the tester tipping o v er .
■
For transpor tation, use the special pac king material f or the
tester .
T ransport the tester in its original package to pre v ent vibration and f alls, which may
damage the tester . If you require packing material, contact Kikusui distrib utor/
agent.