Kikusui TOS6200A, Руководство пользователя

Страница: 37 / 154

TOS6200A/6210 Basic Operation 4-3
4.2 Setting the Test Conditions
■
Test Conditions setup screen
The test conditions are set in the test conditions setup screen (MAIN).
If another screen is displayed, press the MAIN key. The MAIN screen appears on
the LCD, and the LED on the MAIN key lights.
■
Moving to a desired item
Use the
▲▼
keys to move the cursor to a desired item.
If functions are displayed above the F1 to F5 keys, they may be used to move a cur-
sor directly to a desired item. Holding down with the SHIFT key, press any of keys
F1 to F5 to activate the operation indicated above the key.
■
Settings corresponding to safety standards
At factory shipment, settings corresponding to various safety standards are written
to memory. For the memory, see 4.6, "Panel Memory” and Appendix A.3, "Initial
Settings of the Memory.” Also, for the safety standards, see A.4, "Summary of the
Safety Standards for Earth Continuity Testing.”
• “A.4, "Summary of the Safety Standards for Earth Continuity Testing” is a sum-
mary of the safety standards. Before performing actual testing, check the test con-
ditions match your appropriate safety standard.
▲
▲
NOTE