Kikusui TOS6200A, Руководство пользователя

Страница: 24 / 154

2-10 Installation and Preparation for Use TOS6200A/6210
2.4.6 Connecting to the DUT
Connect to the DUT when the tester status is either of the following:
•
Ready (“READY” displayed on the LCD)
• Waiting during a contact check (TEST LED blinking)
• To avoid burns, do not inadvertently touch the testing point or the end of
the test probe or lead during the test or immediately after test, since they
are at high temperature.
■
Testing from the protective conductor terminal of the AC
power inlet
Connect one of the test leads to the protective conductor terminal of the AC power
inlet of the DUT; connect the other test lead to a test point.
■
Testing from the protective conductor terminal on the enclo-
sure
Connect one of the test leads to the protective conductor terminal of the DUT; con-
nect the other test lead to a test point.
WARNING