Kikusui TOS5050A, Руководство по эксплуатации

Страница: 117 / 120

TOS5051A/5050A 10-7
Chap
.10
Speci
fi
cations
10.3 General Speci fi cations
11
Only on models that have CE marking on the panel.Not applicable to custom order models.
12
This instrument is a Class I equipment. Be sure to ground the protective conductor terminal
of the instrument. The safety of the instrument is not guaranteed unless the instrument is
grounded properly.
Item TOS5050A TOS5051A
Environment Spec assured temperature and
humidity
5
°
C to 35
°
C (41
°
F to 95
°
F), 20 % to 80 % RH
Operable temperature and humidity 0
°
C to 40
°
C (32
°
F to 104
°
F), 20 % to 80 % RH
Storage temperature and humidity -20
°
C to 70
°
C (-4
°
F to 158
°
F), 80 % RH or less
Safety
11,12 Conforms to the requirements of the following directive and
standard.
Low Voltage Directive 2006/95/EC
EN 61010-1
Class I
Pollution degree 2
Electromagnetic compatibility
11 Conforms to the requirements of the following directive and
standard.
EMC Directive 2004/108/EC
EN 61326-1
EN 61000-3-2
EN 61000-3-3
Under following conditions
1. Used HV test leadwires TL01-TOS which is supplied.
2. No discharge occurs at outside of the tester.
3. Used the shielded cable which length is less than three
meters when the SIGNAL I/O is used.
AC line
power
requirements
Nominal line voltage range
100 V±10 %, 50/60 Hz
(Factory modi fi cation options: Normal 110 V/120 V/220 V/
230 V/240 V)
Power consumption
Without load (READY)
100 V line
110 V line
120 V line
220 V line
230 V line
240 V line
With rated load
100 V line
110 V line
120 V line
220 V line
230 V line
240 V line
≤
15 VA
≤
20 VA
≤
20 VA
≤
25 VA
≤
25 VA
≤
25 VA
Approx. 600 VA
Approx. 600 VA
Approx. 600 VA
Approx. 640 VA
Approx. 640 VA
Approx. 640 VA
≤
30 VA
≤
40 VA
≤
40 VA
≤
50 VA
≤
50 VA
≤
50 VA
Approx. 630 VA
Approx. 630 VA
Approx. 630 VA
Approx. 640 VA
Approx. 640 VA
Approx. 640 VA
Insulation resistance
≥
30 M
Ω
, with 500 VDC
Withstanding voltage 1390 VAC (2 seconds), between AC line and chassis
Earth continuity
≤
0.1
Ω
at 25 AAC