取扱説明書
/ Instruction manual
セイフティターミナルアダプタ/
Safety Terminal Adapter
ǽ
TL41/TL42/TL43
PART NO. Z1-005-120, IB022632
Jun. 2017
本製品は、導電部に接触できない、安全構造のプラグです。電線との接続方式によって、ねじ接続タイプ、ハンダ接続
タイプ、およびクランプ接続タイプの
3
種類があります。各タイプ毎に赤色、黒色各
1
個があります。ねじ接続タイ
プ、およびハンダ接続タイプは積み重ねて使用できます。測定カテゴリに合ったものを使用してください。使用する電
線は下記の仕様を参照してください。
These terminal adapters are safety plugs, which prevent you from touching the conductive parts of wires. Depending on the
way you want to connect the plug to the wire, there are three types that you can choose from: screw connection type, solder
connection type, and clamp connection type. The package of each type contains a pair of red and black plugs. The screw
connection type and solder connection type plugs can be stacked together. Use plugs that comply with your measurement
category. For the wires to use, see the specifications below.
仕様
Specifications
電線の接続
Wire connection
TL41
ねじ接続タイプ
screw connection type
Model
TL41
TL42
TL43
Connection type
ねじ接続タイプ
Screw connection type
ハンダ接続タイプ
Solder connection type
クランプ接続タイプ
Clamp connection type
Rated voltage, measurement
category
1000 V CAT
Ⅱ
1000 V CAT
Ⅱ
600 V CAT
Ⅱ
Maximum allowable current
32 A
32 A
10 A
Wires to use
Nominal cross-
sectional area
0.75 mm
2
to 2.5 mm
2
（
AWG18 to AWG14
）
0.75 mm
2
to 2.5 mm
2
（
AWG18 to AWG14
）
0.127 mm
2
to 2.5 mm
2
（
AWG26 to AWG14
）
External
diameter
3.9 mm or less
3.9 mm or less
4.8 mm or less
յֿɂ²ρ
2 pieces of each part
յֿɂ²ρ
2 pieces of each part
፷Ɂ߳ͶɥތȾષоȪɑȬǿ
Insert the conductive part of the wire into the hole.
¶ íí
ʨɮʔʃʓʳɮʚ
ǽҏࢥᴷ²®µ íí͏˩
ǽҏՀᴷ°®³µ íí͏˩
ǽ፻͇Ȥʒʵɹᴷ°®µ Îí
Flat-blade screwdriver
Blade width: 2.5 mm or less
Blade thickness: 0.35 mm or less
Tightening torque: 0.5 Nm
፷ɥɬʊʡʉȾоɞɛșȾढȪǾɬʊʡʉȾષоȪɑȬǿ
ብފȻɬʊʡʉɥటͶɵʚ˂ȾષоȪɑȬǿ
Arrange the wire so that it fits in the adapter, and insert it.
Insert the terminal part and adapter into the adapter cover.
