Kikusui PWX1500H, Руководство пользователя

Страница: 51 / 131

PWX
51
CONFIG Settings
Basic Functions
2
CF23 SCPI communication error display parameter
Sets whether to display communication errors. This parameter is displayed and can be set
only when the SCPI language is in use.
CF24 Multichannel (VMCB) domain number parameter
Set the multichannel domain number. PWXs that have the same domain number perform
multichannel operations. If you do not want to use the multichannel function, set this to 0 (this
is the factory default setting).
If 5700 or DCS emulation is selected, you cannot use multichannel. This parameter is applied
when you turn the POWER switch off and on.
For details on the multichannel function, see the Communication Interface Manual on the
included CD-ROM.
CF25 Multichannel (VMCB) channel number
Set the multichannel channel number. Specify a unique number on the network. If you do not
want to use the multichannel function, set this to 0 (this is the factory default setting).
If 5700 or DCS emulation is selected, you cannot use multichannel.
This parameter is applied when you turn the POWER switch off and on.
For details on the multichannel function, see the Communication Interface Manual on the
included CD-ROM.
CF30 to CF33 IP address display
These parameters display the set IP addresses. These parameters are only displayed when
you are using the LAN interface.
To set a fixed IP address, set it from the panel (CF42 to CF45), or access the PWX through a
Web browser. When you access the PWX series through a Web browser, do so under condi-
tions in which a DHCP server or AUTO IP can be used.
For information about the Web browser interface, see the included CD-ROM.
Value Parameter description
oFF SCPI communication errors are not displayed (factory default setting).
on SCPI communication errors are displayed.
Value Parameter description
0 The multichannel function is not used (factory default setting).
1 to 254 The domain number when the multichannel function is used.
Value Parameter description
0 The PWX is used as a master unit on the multichannel network (factory default
setting).
1 to 30 The PWX is used as a slave unit with this channel number on the multichannel
network
Parameter
number Display Description
CF30 0 to 255 Displays the first IP address number
CF31 0 to 255 Displays the second IP address number
CF32 0 to 255 Displays the third IP address number
CF33 0 to 255 Displays the fourth IP address number