Kikusui PWX1500H, Руководство пользователя

Страница: 117 / 131

PWX
117
Isolated Analog Interface
7
Fa
ctory Option
Specifications
Common
Isolated external control input (Voltage control)
Isolated output voltage control (VPGM_IS) 0 % to 100 % of the rated output voltage
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Isolated output current control (IPGM_IS) 0 % to 100 % of the rated output current
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Isolated output control
common Accuracy ±5 % of rtg
Temperature
coefficient ±100 ppm/°C
Input impedance 1 M Ω
Maximum absolute
applied voltage 0 V to 15 V
Isolated output on/off control Possible logic selections:
Apply a LOW (0 V to 0.5 V) or short-circuit to set the OUT ON/
OFF CONT (pin 18 of the J1 connector) to LOW.
Apply a HIGH (4.5 V to 5 V) or open-circuit to set the OUT ON/
OFF CONT (pin 18 of the J1 connector) to HIGH.
Isolated shutdown control Apply a LOW (0 V to 0.5 V) or short-circuit to set the SHUT-
DOWN (pin 6 of the J1 connector) to LOW.
Isolated monitor signal output (Voltage control)
Isolated voltage monitor (VMON_IS) 0 V to 5 V, 0 V to 10 V
Isolated current monitor (IMON_IS) 0 V to 5 V, 0 V to 10 V
Isolated monitor
common Accuracy ±4 % of rtg
Isolated external control input (Current control)
Isolated output voltage control (VPGM_IS) 0 % to 100 % of the rated output voltage / 4 mA to 20 mA
Isolated output current control (IPGM_IS) 0 % to 100 % of the rated output voltage / 4 mA to 20 mA
Isolated output control
common Accuracy 5 % of rtg
Temperature
coefficient ±200 ppm/°C
Input impedance 50 Ω
Isolated output on/off control Possible logic selections:
Apply a LOW (0 V to 0.5 V) or short-circuit to set the OUT ON/
OFF CONT (pin 18 of the J1 connector) to LOW.
Apply a HIGH (4.5 V to 5 V) or open-circuit to set the OUT ON/
OFF CONT (pin 18 of the J1 connector) to HIGH.
Isolated shutdown control Apply a LOW (0 V to 0.5 V) or short-circuit to set the SHUT-
DOWN (pin 6 of the J1 connector) to LOW.
Isolated monitor signal output (Current control)
Isolated voltage monitor (VMON_IS) 4 mA to 20 mA
Isolated current monitor (IMON_IS) 4 mA to 20 mA
Isolated monitor
common Accuracy 4 % of rtg
Load impedance 500 Ω or less