Kikusui PLZ1004WH, Руководство пользователя

Страница: 80 / 158

80
PLZ-4WH
Sequence Example (Fast Sequence)
Setting the steps of program 11
Set the current and trigger output of each step in program 11. In this example the current will
be set first, followed by the trigger output.
Each time you press , the cursor moves between items in this order: step number, current,
trigger output setting, and then magnification.
Each time you press , the cursor moves between items in this order: magnification, trigger
output setting, current, and then step number.
1
Make sure that the cursor is blinking at STEP.
If the cursor is not blinking at STEP, press and to move it there.
2
Turn the rotary knob to set the step number to 1.
3
Press to move the cursor to the current, and turn the rotary knob to
set the value to 6 A.
4
Press to move the cursor to STEP.
5
Set the currents for steps 2 through 5 to 6 A in the same way that you set
step 1.
6
Set the current for step 6 to 3 A.
7
Press to move the cursor to the trigger output setting, and turn the
rotary knob to select T.
8
Set the currents for steps 7 to 10 to 6 A.
9
Set the current for step 11 to 3 A.
10
Set the currents for steps 12 to 15 to 6 A.
All the settings for program 2 have been entered.
11
Press PREV (SHIFT+ ) twice to display the sequence editing screen.
Each time you press PREV (SHIFT+ ), the previous screen is displayed. Keep
pressing PREV (SHIFT+ ) until the screen that was displayed before you started
sequence editing appears.
6.0000
A
STEP:0014
M1
C u r r e n t S t e p n u m b e r
Tr i g g e r o u t p u t
M a g n i f i c a t i o n
Wa v e f o r m d i s p l a y
Memo
You can move the cursor
by pressing
and .
Press PREV (SHIFT+ )
to return to the previous
screen.