Kikusui PLZ1004W Скачать руководство пользователя страница 155

Страница: 155 / 216

PLZ-4W

Remote Control 7-3

7.2

Interface Setup

The factory default remote control interface setting is GPIB.

7.2.1

GPIB Control

■

GPIB connection

Use a standard IEEE488 cable to connect the PLZ-4W to the PC.

■

GPIB configuration

Check that the load is turned off.

Check that the LOAD LED is turned off. If it is on, press the LOAD key to turn
it off.

Select the menu setup.

Press the MENU (SHIFT+SET/VSET) key. The menu screen is displayed.

Select Configuration

Press the

CURSOR key several times until Configuration is high-

lighted on the menu. When highlighted, press the ENTER key.

Select interface.

Press the

CURSOR key several times until Interface is highlighted on

the menu. When highlighted, press the ENTER key.

Select GPIB.

Check that the cursor is blinking by Control on the menu, and turn the rotary
knob to select GPIB.

Select Address.

Press the

CURSOR key and check that the cursor is blinking by Address on

the menu. Then, turn the rotary knob to set the device address.

Exit from the menu.

Press the MENU (SHIFT+SET/VSET) key. The original screen displayed
before entering menu setup appears.

Power cycle the PLZ-4W.

The settings are confirmed.

Содержание PLZ1004W

























































































































































































































Результаты поиска

Содержание PLZ1004W

Отзывы:

Kikusui PLZ1004W, Руководство пользователя, Страница: 155 / 216

Результаты поиска

Содержание PLZ1004W

Отзывы: