Kikusui PLZ1004W, Руководство пользователя, Страница: 121 / 216

PLZ-4W Applied Operation 6-35
■
Monitoring the settings
1. Select sequence edit.
Press the EDIT (SHIFT+A) key to display the program edit screen.
2. Press the ENTER key to move to the monitor screen.
3. Set the magnification.
Press the key to move the cursor to magnification, and turn the rotary knob
to set the magnification. Eight magnification types, M1, 2, 3, ..., 8 are avail-
able. Magnification M1 is the largest.
4. Select the step number.
Press the key to move the cursor to the step number. Turn the rotary knob to
change the step. The waveform moves with the specified step centered in the
rectangular frame.
The range that can be monitored is up to the last step per loop you specified.
At magnification M1, the waveform moves one step at a time when you turn
the rotary knob. Thus, you can monitor the details. Likewise, the waveform
moves 2 steps and 3 steps at a time for magnification M2 and M3, respectively.
At magnification M8, the waveform moves 8 steps at a time.
5. Finish editing.
Pressing the PREV (SHIFT+ ) returns to the previous page.
■
FILL function operation
1. Select sequence edit.
Press the EDIT (SHIFT+A) key to display the program edit screen.
2. Press the ENTER key to move to the monitor screen.
3. Press the INS (SHIFT+ ) key to move to the FILL screen.
4. Set the value.
Press the or key to move the cursor to the DATA1 value. Turn the rotary
knob to set the current value of the start step. Likewise, set the current value of
the end step at DATA2, the start step number at START, and the end step num-
ber at STOP.
• The end step number can be set up to 1024, but the range that can be monitored is
the last step per loop specified by RPTSTEP.
5. Finish editing.
Press the ENTER key to move to the monitor screen.
10.00
A
STEP:0014
M1
10.00
A
STEP:0014
M1
DATA1: 0.164
A
DATA2: 1.164
A
START: 0016
STOP : 1024
ENTER
FILL
NOTE