8
PLZ-5W SR Series Setup Guide
1.Preparation
Checking Whether the Power Is On or Off
4
Connect the power cord plug to a properly grounded outlet.
Checking Whether the Power Is On or Off
Turning the power on
1
Check that the power cord is connected correctly.
2
Check that nothing is connected to the load input terminals (DC INPUT).
3
Turn the POWER switch on ( ).
After the startup screen, the load value input screen appears.
If you notice strange sounds, unusual odors, fire, or smoke around or from inside the PLZ-5W
SR, turn off the power switch ( ), or turn off the switchboard breaker.
By factory default, the panel settings immediately before the POWER switch is turned off are
saved. If you turn the power on, the PLZ-5W SR starts in the same state as it was in the last
time that it was turned off. (However, the load setting is always Load Off.)
The panel setting state at startup can be changed. For details, see the PLZ-5W Series User’s
Manual.
To a grounded outlet
POWER switch
