Kikusui PLZ-4W Series, Руководство пользователя

Страница: 155 / 218

PLZ-4W Applied Operation 6-65
• Master unit
6. Set as a master unit.
First, turn the rotary knob to the right to select MASTER.
When slaves are connected, press the CURSOR key to move the cursor to
the Parallel item.
Turn the rotary knob to set the total number of master and slave units.
• The Booster item appears only on the PLZ1004W.
• Slave units
6. Set as a slave unit.
Turn the rotary knob to the left to select SLAVE.
When SLAVE is selected, the Parallel and Booster items disappear.
7. Exit from the menu.
Press the MENU (SHIFT+SET/VSET) key.
On the master unit, the original screen displayed before entering menu
setup appears. On slave units, Slave Mode appears on the display.
8. Power cycle the PLZ-4W.
Turn on the POWER switch of all units at once or turn on the POWER switch
of the master unit
fi rst to turn on the power to all units.
The menu settings are con fi rmed.
9. Set the operation mode and value, and turn on the load.
Operate the master unit to set the master mode and value. The range of the
rated current and rated power on the master unit is expanded.
After entering the settings, turn off the load.
6.10.2 Parallel Operation Using Load Boosters
Load boosters are slave units dedicated to parallel operation. They operate as slave
units simply by connecting them to the PLZ1004W. However, on the PLZ1004W
that is to become the master unit, the master unit setting and the number of load
boosters to be connected must be con
fi gured.
For the connection procedure, see section 2.6, “Parallel Connection” in the opera-
tion manual of the load booster.
For the setup procedure of the master unit, see section 2.7, “Setting the Master
Unit” in the operation manual of the load booster.
• Load boosters (PLZ2004WB) can only be connected to PLZ1004W.
Operation : MASTER
Parallel : --
Booster : --
PREV
Master/ Slave
Operation : SLAVE
PREV
Master/ Slave
NOTE