Kikusui PLZ-30F, Инструкции по эксплуатации, Страница: 37 / 192

PLZ-U Names and Functions of Parts 3-5
[14] A, B, and C keys
You can save and recall three preset values A, B, and C for each mode and range on
the selected channel.
If you press one of these keys while holding down the SHIFT key (SHIFT + A, B, or
C), the presets of all the channels can be recalled simultaneously. However, this
does not apply to channels whose independent mode is on (INDEP key is illumi-
nated).
[15] Switching function, sequence function, etc.
[15-1] SW ON/SEQ key
SW ON
Turns on or off switching mode on the selected channel. The SW LED illuminates
in switching mode. Switching mode is valid in CC or CR mode.
SEQ
Press this key while holding down the SHIFT key (SHIFT + SW ON) to enter
sequence mode on the selected channel. In sequence mode, this key and the SEQ
LED of the frame and channel illuminate.
[15-2] LEVEL/STEP/UVP key
LEVEL
Press this key to set the switching level of switching mode on the selected channel.
In switching mode, the preset value (SET value) and the level value are toggled.
STEP
Press this key to set the step number of sequence mode on the selected channel.
UVP
Press this key while holding down the SHIFT key (SHIFT + LEVEL/STEP) to set
the undervoltage protection (UVP) value on the selected channel.
[15-3] FREQ/TIME/TIMER key
FREQ
Press this key to set the switching frequency of switching mode on the selected
channel.
TIME
Set the step time of sequence mode on the selected channel.
TIMER
Press this key while holding down the SHIFT key (SHIFT + FREQ/TIME) to set the
auto load off timer on the selected channel.