Kikusui PLZ-30F, Инструкции по эксплуатации, Страница: 35 / 192

PLZ-U Names and Functions of Parts 3-3
• If you press a key while holding down the SHIFT key, the function indicated
below the key in blue is enabled.
• This manual denotes the operation of pressing a key while holding down the
SHIFT key as SHIFT + (notation above the key).
[1] POWER
The POWER switch. The power toggles on and off each time the switch is pressed.
Press the POWER switch while holding down the SHIFT key (SHIFT + POWER)
to reset the panel settings to factory default. For details, see section 5.13, “Factory
Default Settings.”
[2] REMOTE
A connector for functional expansion. The connector cannot be used currently.
[3] LOAD key
Controls the current on all channels. The current is toggled on and off each time the
key is pressed. When the load is turned on, the LOAD LED on the frame and the
LOAD LEDs of the channels whose load is turned on illuminate. However, channels
whose independent mode is on (INDEP key is illuminated) are not affected.
[4] CC, CR, CV/+CV keys
Keys for selecting the operation mode of the selected channel. If you press these
keys while the load is on, the load is turned off.
[4-1] CC
Switches the operation mode to CC. In CC mode, this key and the operation mode
indicator of the load unit illuminate.
[4-2] CR
Switches the operation mode to CR. In CR mode, this key and the operation mode
indicator of the load unit illuminate.
[4-3] CV/+CV
CV
Switches the operation mode to CV. In CV mode, this key and the operation mode
indicator of the load unit illuminate.
+CV
Pressing this key while holding down the SHIFT key (SHIFT + CV) speci fi es a
mode in which CV mode is added to CC mode or CR mode. If the PLZ-U is in CC
mode, CC+CV mode is enabled. If the PLZ-U is in CR mode, CR+CV mode is
enabled.
[5] RANGE/V RANGE key
A Key for selecting the range of the selected channel. If you press this key while the
load is on, the load is turned off. After the range changes, the load automatically
turns back on.
NOTE