Kikusui PBZ20-20, Руководство пользователя, Страница: 80 / 170

80
PBZ
Setup Memory
Saving Settings to Setup Memory
1
Press STORE (SHIFT + RECALL).
The STORE (SHIFT + RECALL) key blinks, and the cursor is displayed at the memory
number. Because no memory number is selected, “NO SELECT” is displayed. To
abort the save operation, press a key other than the STORE (SHIFT + RECALL) key.
2
Turn the rotary knob to select a memory number (from STO0 to STO9).
The name of the memory entry that corresponds to the selected memory number is
displayed. If no name has been assigned to the memory entry, “UNTITLED” is
displayed.
3
Use the left and right cursor keys to select the character that you want to
change.
If you do not want to change the character, proceed to Procedure 8.
4
Turn the rotary knob to select the character.
You can select ASCII code characters in the range of 0x20 to 0x7E. If you fix the
character that you specified using the rotary knob, the character is confirmed. To add
or delete characters, proceed to the following steps.
Adding and deleting characters
5
Use the left and right cursor keys to select a character.
6
Press INS (SHIFT + the up cursor key).
A space is inserted to the left of the cursor.
If you press DEL (SHIFT + the down cursor key), the character at the cursor position is
deleted.
7
Turn the rotary knob to select the character.
The space changes to the selected character. You can select ASCII code characters
in the range of 0x20 to 0x7E. You can enter up to 15 characters. If you want to
continue entering characters, repeat steps Procedure 5 to Procedure 7. If you want to
finish entering characters, proceed to the next step.
8
Press ENTER.
The STORE (SHIFT + RECALL) key turns off. “Saved!” is briefly displayed, and the
settings are saved to the selected memory number. If a memory entry already exists
with the same memory number, it is overwritten.
Loading Setup Memory Entries
1
Press OUTPUT to turn output off.
2
Press RECALL.
The RECALL key blinks, and the memory number and memory name are displayed.
To abort the load operation, press the RECALL key again.
3
Turn the rotary knob to select a memory number (from RCL0 to RCL9).
The memory name that corresponds to the selected memory number is displayed.
4
Press ENTER.
The RECALL key turns off. “Recalled!” is briefly displayed, and the settings that
correspond to the selected memory number are loaded.