Kikusui PBZ20-20, Руководство пользователя

Страница: 74 / 170

74
PBZ
Basic Operations
Changing the Screen Brightness
You can select from 11 brightness levels.
Hold the SHIFT key down, and turn the rotary knob.
Setting the PBZ to Local Mode
Use the following operation to finish remote control and enable key operations (the RMT icon
in the status display area is cleared).
Setting the PBZ to Its Factory Default Settings
Use the following operation to set the PBZ to its factory default settings.
Buzzer
The buzzer sounds when the following operations are carried out, or when the PBZ is in one
of the following states. Use to turn the buzzer sound on and off.
p. 90
Operation What happens on the PBZ
Turn clockwise The contrast increases.
Turn counterclockwise The contrast decreases.
Operation What happens on the PBZ
Press LOCAL Remote control finishes.
Operation What happens on the PBZ
While holding down SHIFT, turn the
POWER switch on. “INITIALIZING” is displayed on the screen, and the PBZ is
initialized to its factory default settings.
CONFIG
See
Operation or state What happens on the PBZ Notes
Turn the POWER switch on and off Two short, high-pitched sounds When the PBZ starts or
shuts down.
Selftest error at startup Three long, high-pitched sounds System error
Overvoltage, overcurrent, or overheat A single long, high-pitched sound This is the alarm noise.
Lock or unlock the key lock A single short, high-pitched sound Operation accepted.
Communication command or key
input error A single short, low-pitched sound Operation rejected.