Kikusui PAV10-20, Руководство пользователя

Страница: 26 / 46

26
PAV LAN
DC Power Page 3. Webpage
Utility tab
Click the Utility tab on the DC Power page. Use this tab to send and receive SCPI com-
mands. From this tab, you can use functions that are not available on the webpages.
Utility tab
1 2
No. Item Description
1
Send Custom SCPI
Commands
Enter an SCPI command
1
in this text box and click Send and Read to
display the response from the PAV in the text box below the command
input text box.
Some commands do not have responses.
2 Read System Errors
Click Read Errors to display system error messages in this text box.
To view system error message, send a SYSTem:ERRor:ENABle in
advance to enable error messages.
If there is no error, “No error” is displayed.
1 If you send a command using Internet Explorer to output trigger pulses from J3-3 (Trigger Out),
pulses may be output under conditions other than the trigger output conditions (TRIG or FSTR)
specified by the OUTP:TTLT:MODE command or through the front panel. To avoid this prob-
lem, use other browsers such as Google Chrome or Mozilla Firefox.