Kikusui OT01-PCR12000LA/2, Руководство по эксплуатации

Страница: 31 / 96

OT01-PCR-LA/2 Installation and Preparation for Use 2-15
2.5.3 Signal Connection Cables
Use the supplied signal connection cables. Connections between the Output Termi-
nal and PCR-LA power supplies are classi
fi ed into six blocks:
1. Between the Output Terminal and the master PCR-LA power supply
2. Between the Output Terminal and the slave PCR-LA power supply
3. Between the master and slave PCR-LA power supplies
There are six signal connection cables of fi ve types.
For the driver signal connection cables of the Parallel Operation Driver or Single-
phase, Three-wire Output Driver, see “2.5.4 Parallel Operation Driver” and “2.5.5
Single-phase, Three-wire Output Driver”.
Cable Names and Details of Connections
1. Connection between the Output Terminal and master PCR-LA
power supply
* This connection can be made to the J1 connector of the slave PCR-LA power supply, depending
on the convenience of the placement of the Output Terminal and PCR-LA power supplies.
2. Connection between the Output Terminal and slave PCR-LA
power supply
Output Terminal Cable name Master PCR-LA power supply
TO PCR-LA-MASTER
TO J1
←→
Signal connection
cable 1
J1*
TO J4-1
←→
Signal
connection cable 2
J4
TO PD03M-OT01-PCR-LA
←→
Signal connection
cable 5
PD03M-OT01-PCR-LA
(optional slot)
Output Terminal Cable name
Slave PCR-LA power supply
TO PCR-LA TO J4-2
←→
Signal
connection cable 2
J4
Output Terminal
Cable name
Signal connection
cable 4
SENSING terminals of the
PCR-LA power supplies
TO PCR-LA
TO
SENSING
←→
White
Terminal L of
the master unit
←→
Black
Terminal N of
the master unit