OT01-PCR-LA/2
General 1-5
1.4
The Applicable ROM Version of the PCR-LA
This Operation Manual applies to cases in which the expansion kit is connected to
PCR-LA AC power supplies with ROM of
version 3.35 or later.
When using above options with the PCR-LA in single-phase three-wire operation,
the PCR-LA must be required with the ROM version of 3.35 or later. If the ROM
version of the PCR-LA is 3.34 or previous version, the PCR-LA is required for the
ROM update.
To check the ROM version of the PCR-LA, refer to the operation manual of the
PCR-LA series.
In case, the PCR-LA needs the ROM update, contact your Kikusui agent or distrib-
utor.
When making an inquiry about the product, please provide us with the following
information:
• Model name of the PCR-LA power supplies
• ROM version of the PCR-LA power supplies
• Serial numbers and revision numbers of the PCR-LA power supplies (indicated
at the lower rear of the products)
• Model name of this expansion kit
• Serial number and revision number of the expansion kit (indicated at the rear of
the Output Terminal)
1.5
Combination of Options
The table below shows a combination of the options available. They can be installed
in the PCR-LA AC power supply in which the U-phase card has been installed.
Option name
Model name
Remote Controller
RC04-PCR-LA
GPIB Interface
IB03-PCR-LA
Содержание OT01-PCR12000LA/2
