Kikusui KHA3000, Руководство по эксплуатации, Страница: 373 / 392

Appx
KHA3000
373
C
Error List
Command error list
An error in the [-199, -100] range indicates that an IEEE 488.2 syntax error was detected by
the syntax parser of the measuring instrument. If an error in this class occurs, the command
error bit (bit 5) of the event status register is set.
Error code Explanation of error message
-100 Command error Generic syntax error
-101 Invalid character A syntactic element contains a character which is invalid.
-102 Syntax error An unrecognized command or data type was encountered.
-103 Invalid separator The parser was expecting a separator and encountered an illegal character.
-104 Data type error The parser recognized a data element different than one allowed.
-105 GET not allowed A Group Execute Trigger was received within a program message.
-108 Parameter not allowed More parameters were received than expected for the header.
-109 Missing parameter Fewer parameters were received than required for the header.
-110 Command header error An error was detected in the header.
-120 Numeric data error Generated when parsing a data element which appears to be numeric, including
the nondecimal numeric types.
-130 Suffix error Generated when parsing a suffix.
-131 Invalid suffix The suffix does not follow the syntax, or the suffix is inappropriate for this product.
-134 Suffix too long The suffix contained more than twelve characters.
-138 Suffix not allowed A suffix was encountered after a numeric element which does not allow suffixes.
-140 Character data error Generated when parsing a character data element.
-141 Invalid character data Either the character data element contains an invalid character, or the element is
not valid.
-144 Character data too Long The character data element contains more than twelve characters.
-148 Character data not allowed A legal character data element was encountered where prohibited by this product.
-150 String data error Generated when parsing a string data element.
-160 Block data error Generated when parsing a block data element.
-170 Expression error Generated when parsing an expression data element.
-180 Macro error Generated when defining a macro or executing a macro.